Global Automotive Propeller Shaft Market is Growing with the Rising Automotive Production; MRFR Reveals Insights for 2017-2023

 

The global automotive propeller shaft market is garnering impressive traction. The market witnesses substantial investments by automotive manufacturers in the research and development of innovative product lines. Besides, the major focus of automakers to develop lightweight shaft to reduce the overall weight of the vehicle drives the growth of the market. Also, the market growth attributes to increasing vehicle sales and the automotive industry worldwide.

Moreover, the rising production of electric vehicles and lightweight vehicles escalate market demand. According to Market Research Future (MRFR), the global automotive propeller shaft market is estimated to grow at approximately 8.50% CAGR during the assessment period (2017-2023). Rising adoption of shaft technologies required to drive axle or rear axle a substantial market demand. Growing demand for high torque vehicles and safety concerns are the major growth drivers.

Additionally, rapid advances in shaft technologies and materials used to manufacture shafts accelerate market growth. The increase in sales of luxury vehicles and sports cars pushes the market growth. Simultaneously, the constant rise in smart and autonomous vehicle sales boosts market revenues. Conversely, fluctuating prices and the demand-supply gap in raw materials required for production are major factors projected to impede the market growth.

Similarly, low-cost counterfeit propeller shafts floating in the market are anticipated to obstruct the market growth during the predicted period. Nevertheless, the spurring rise in the auto component industry would support market growth throughout the review period.

 

Automotive Propeller Shaft Market – Segments

The report is segmented into five dynamics.

By Position: Front, Rear, and Inter-Axle Propeller Shaft.

By Type      : Live, Dead, and Tandem Axle.

By Propeller Shaft Type     : Single, Multi Piece, and others.

By Material: Alloy and Carbon Fiber.

By Regions:  Americas, Europe, APAC, and the Rest-of-the-World.

 

Global Automotive Propeller Shaft Market – Regional Analysis

The Asia Pacific region leads the global automotive propeller shaft market. The largest market share attributes to the increasing demand for propeller shaft among both OEMs and aftermarket replacement. Also, substantial R&D investments for product development, advances in material technologies, and increased vehicle sales drive the regional market growth.

Besides, the region with its raw material advantages attracts foreign investors and therefore witnesses increasing the numbers of production plants. Moreover, the continually rising economy and population in the region accelerate the automotive propeller shaft market sales. China leads the APAC automotive propeller shaft market, followed by India.

Europe stands second in the global automotive propeller shaft market. The market is driven by the presence of several automotive technology providers in this region. Europe is the global hub for automobile research and innovation, which positively impacts the regional market's growth. Furthermore, enormous advances in automotive technologies and the rising economic growth in the region propel market growth. Additionally, the large and well-established automotive sectors in the region substantiate the growth of the market.

Also, increased vehicle safety concerns influence the growth of the regional market. Furthermore, strict government standards for vehicle safety influence market growth in the region. The European Automotive Propeller Shaft market is projected to create an immense revenue pocket during the assessment period.

North America is also a considerably large market for automotive propeller shafts, globally. The development of reduced weight shafts and increasing demand from the transportation sector are the latest propeller shaft market trends. Besides, factors such as the growing significant GDP and high per capita income of demographics foster the regional market's growth. Moreover, favorable government policies, leading OEMs, and well-developed automobile infrastructures in the region influence the automotive propeller shaft sales.

Get a FREE Report Sample - https://www.marketresearchfuture.com/sample_request/5370

 

Automotive Propeller Shaft Market – Competitive Analysis

Highly competitive, the automotive propeller shaft market appears diversified with the presence of several well-established players. To gain a larger competitive share of the market, innovation, mergers & acquisitions, and brand reinforcement remain key trends for propeller shaft manufacturers.

Major Players: 

Players leading the automotive propeller shaft market include American Axle & Manufacturing, Inc. (U.S.), ZF Friedrichshafen AG (Germany), Meritor, Inc. (U.S.), GKN plc (U.K.), Showa Corporation (Japan), Wilson drive shafts (England), JTEKT Corporation (Japan), Nexteer Automotive (U.S.), Gestamp (Spain), D & F Propshafts (U.K.), Dana Holding Corporation (U.S.), Bailey Morris Limited (England), American Axle & Manufacturing Holdings, Inc. (U.S.), B & F limited (U.K.), and Hyundai Wia Corporation (South Korea), among others.

Industry/ Innovation/ Related News:

October 27, 2020 ----- Scania AB (Sweden), a major commercial vehicles manufacturing company, launched a heavyweight vehicle - XT Heavy Tipper for the mining and heavy construction industries. The new heavyweight contender would substantially reduce costs and increase productivity for operators in these businesses. Scania is again at the forefront of innovation to exceed customer expectations and take on the yellow equipment manufacturers. 

Scania specifically manufacturers heavy Lorries, trucks, and buses. This outstanding heavyweight is equipped with an air-sprung, steered pusher axle in front of the rear bogie and propeller shaft supporting higher torque, the greater strength of the differential and hub reduction to support higher loads, the entire suspension – springs, anti-roll bar, and shock absorbers ­ – has been reinforced.

Get a FREE Report Sample - https://www.marketresearchfuture.com/sample_request/5370

Key Questions Addressed by the Report

  • What was the historic market size?
  • Which segmentation (Product/ Capacity) is driving market?
  • What will be the growth rate?
  • How are the key players in this market?
  • What are the strategies adopted by key players?

TABLE OF CONTENTS

 

1 EXECUTIVE SUMMARY

 

2 SCOPE OF THE REPORT

2.1 MARKET DEFINITION

2.2 SCOPE OF THE STUDY

2.2.1 DEFINITION

2.2.2 RESEARCH OBJECTIVE

2.2.3 ASSUMPTIONS

2.2.4 LIMITATIONS

2.3 RESEARCH PROCESS

2.3.1 PRIMARY RESEARCH

2.3.2 SECONDARY RESEARCH

2.4 MARKET SIZE ESTIMATION

2.5 FORECAST MODEL

 

3 MARKET LANDSCAPE

3.1.1 THREAT OF NEW ENTRANTS

3.1.2 BARGAINING POWER OF BUYERS

3.1.3 THREAT OF SUBSTITUTES

3.1.4 SEGMENT RIVALRY

3.1.5 BARGAINING POWER OF BUYERS

3.2 VALUE CHAIN/SUPPLY CHAIN ANALYSIS

 

4 MARKET DYNAMICS

4.1 INTRODUCTION

4.2 MARKET DRIVERS

4.3 MARKET RESTRAINTS

4.4 MARKET OPPORTUNITIES

4.5 MARKET TRENDS

About Market Research Future:

At Market Research Future (MRFR), we enable our customers to unravel the complexity of various industries through our Cooked Research Report (CRR), Half-Cooked Research Reports (HCRR), Raw Research Reports (3R), Continuous-Feed Research (CFR), and Market Research & Consulting Edibles.

MRFR team have supreme objective to provide the optimum quality market research and intelligence services to our clients. Our market research studies by products, services, technologies, applications, end users, and market players for global, regional, and country level market segments, enable our clients to see more, know more, and do more, which help to answer all their most important questions.

Media Contact
Company Name: Market Research Future
Contact Person: Abhishek Sawant
Email: Send Email
Phone: +1 646 845 9312
Address:Market Research Future Office No. 528, Amanora Chambers Magarpatta Road, Hadapsar
City: Pune
State: Maharashtra
Country: India
Website: https://www.marketresearchfuture.com

 

Browse Complete Report - https://www.marketresearchfuture.com/reports/automotive-propeller-shaft-market-5370

 

 

Comments

Post a Comment

Popular posts from this blog

Automotive Shock Absorber Market Demand, Analysis, Forecast to 2020-2025

  Market Scope Automotive shock absorbers market has significant growth scope and is estimated to reach USD 70.2 billion by 2025. The reports forecast the automotive shock absorbers market by shock absorbers type, vehicle type, and region. It highlights COVID-19 impact on the automotive shock absorbers industry.   Description   Automotive Shock Absorbers Market: by Type (Air Shock Absorber, Damper Shock Absorber, Conventional Telescopic Shock Absorbers, Strut Type Shock Absorbers, and Spring Seat Shocks), by Vehicle Type (Two-wheeler, Commercial Vehicle, and Passenger Car), and by Region – Global Industry Sizing, Growth, Trend, Opportunity, and Forecast (2020–2025)   Get Free Sample Copy@  https://www.marketstatsville.com/request-sample/automotive-shock-absorbers-market1-test-new1   The automotive shock absorbers market report covers a thorough analysis of the market dynamics, business models, segmental/regional analysis, and respective mark...
Read more

Global Conveyor System Market to Roll on till 2022 Owing to Optimization of Internal Processes in Warehouses

  Conveyor systems are mechanical systems able to transport materials within the factory premises from one location to another. They are popular in mining, manufacturing, material handling, and packaging industries due to being handy in transporting sharp items and mass-produced items. Market Research Future (MRFR) estimates projections on growth and revenue on the global conveyor systems market for the period of 2016 to 2022 (forecast period). The COVID-19 pandemic and its impact have been included in the full report. Market Scope The global conveyor systems market is anticipated for fabulous growth over the forecast period owing to applications in various end-use industries. Rise in factory automation and massive construction projects can drive the market demand till 2022. Emphasis on physical distancing and need for safe handling of materials within company premises can drive the demand for conveyor systems. Rapid industrialization and inclination of ecommerce firms towards ...
Read more

Global Semi-Autonomous Vehicle Market Share to witness an economic disruption caused by COVID 19

  Market Synopsis The focus on vehicle safety to reduce the number of road accidents and associated deaths and the regulations incorporating safety features in vehicles are factors driving the global Semi-Autonomous Vehicle Market Size     during the forecast period. Furthermore, the increase in demand for efficient driving experience, the need for better fuel efficiency and the increased integration of advanced technology in the automotive sector are expected to contribute to market growth. The semi-autonomous market size of vehicles can however be hindered by the greater price of semi-autonomous vehicles and the lack of information technology , communication infrastructure in emerging countries. Increasing demand for connected cars during the forecast period is expected to create an opportunity for the global semi-autonomous vehicle industry. Over the forecast period , the global Semi-Autonomous Vehicle Market   Trends is expected to experience rapid growth , dri...
Read more